Truck Vibrators

The special design of Truck Vibrators of NAVCO promotes trouble free removal of bulk amount of materials from truck. These vibrators are installed on hoppers or set up on the bed of dumper truck to improve flow level of unloaded materials. The offered BH model of vibrators is generally attached to the bed of dump truck not only for enhancing material flow capacity, but also to improve loading capacity of truck. The easy to carry mounting option available with these vibrators is useful for their trouble free shifting to different sites. Usually the portable mounting is connected with air lines that are in use. The Truck Vibrators of NAVO brand perfectly suit the material unloading needs of volumetric trucks, movable concrete mixers and gunite trucks for uninterrupted material flow. 

Benefits

• Faster unloading – These vibrators assist in saving unloading time (maximum 50%) of all sorts of materials, specially wet or viscous materials.
• More removal – The special mechanism of these vibrators prevent deposition of material residues in hoppers.
• Extended machinery life – These vibrators are useful for trouble free unloading of materials without removal or lowering of hinged flap of truck, braking, jolting or bouncing of trucks. These not only extend working life of trucks, but also ensure safety of unloaded goods.
• Increased safety – These vibrators guarantee about effective removal of goods sans positioning dump bed at angular direction. These also ensure complete protection of goods against theft or other external damages.
• Ease in spreading – Uniform flow of materials for faster unloading purpose

Installation 

Dump Truck Body: 

1.These vibrators need to be installed around ¼ times below the truck bed length by maintaining front direction.

2.Each unit of these vibrators should be placed in every side of the mast.

Note: The vibrators should be dissembled during lowering of the bed.

Hopper Bottom Truck Vibrators: 

1.The distance between hopper discharging outlet and vibrators needs to be as less as possible. 

2.We suggest connecting mounting plate of NAVCO for the hopper. Easy to carry mounting plate available in the market is meant for installation of hopper bottom.

3.Use bolt to install vibrator on the mounting plate.

Note: A substitute air reservoir needs to be used to supply necessary air during breaks in case the vibrators are used while the truck is driven.