Send SMS
Home » Products » Pneumatic Cylinders » Standard Pneumatic Cylinders

Standard Pneumatic Cylinders

Standard Pneumatic Cylinders
Standard Pneumatic Cylinders
Send Inquiry
Product Code : SPC 08
Product Description
With the help of the outstanding infrastructure facility and up to date amenities, we have been manufacturing & exporting best quality Standard Pneumatic Cylinders. Manufactured using hard chrome plated seamless tubes and EN-8 piston rods, high quality neoprene and cast iron; these cylinders are widely used in a number of industrial applications and are available in a number of bore sizes ranging between 6mm to 350mm.  

  • Superior quality
  • Stain resistant
  • Superior performance
Standard Pneumatic Cylinders

With strokes between 15mm to 1000mm long, our Standard Pneumatic Cylinders are available in a number of bore dimensions ranging between diameters 6mm to 350mm. These pneumatic cylinders are formed using C.I. end covers, hard chrome plated heavy duty seamless tubes, hard chrome plated EN-8 piston rods and superior quality neoprene/nitrile seals.


Cylinder Tube: For bore size of 19, 25, 40, and 50 mm hard drawn, aluminum tube/ polished brass and for bores size of 65, 75, 100, 125, 150, 200, 250 and 300 mm seamless hard chrome plated and honed steel tube is taken into use.      
Piston Rod: Ground & hard chrome plated, High tensile steel.
Seals : Buna "N" (Nitrile elastomer)
Piston and End cover: Close grained cast iron.

Operating Condition:

Media : Oil, Air,  and inert-gases.
Temp. Range : 0o C to +85o C
Pressure Range: 25 Kg/cm2 (350 PSIG) for oil and 10 Kg/cm2 (150 PSIG) for compressed air.  
Cushions: For bore size between 19 and 25 mm rubber shock absorbers are optional. Over 25 mm bore flexible cushions as standard.  
Consumption: Liters of free air every 100 mm single stroke at 5 Kgf/cm2


Back to top